The FRITSCH Variable Speed Rotor Mill PULVERISETTE 14 premium line is designed to offer impact, shearing and cutting comminution in one instrument.
Its powerful motor is suitable for the particularly fast comminution of soft to medium-hard, brittle as well as fibrous materials and temperature-sensitive samples with a fast sample throughput of up to 15 litres and more per hour, depending on the material and parameter settings.
The AutoLOCK grinding chamber facilitates automatic opening and closing with clamping and crushing protection. The additional Intelligence-Safety-Control-System only allows the instrument to start if the grinding set is fully and correctly inserted. Every part requiring regular cleaning can be removed with a single motion without tools, including the instrument lid.
Powerful grinding with 22,000 rpm for particularly fast sample throughput
Max. feed size < 15 mm, sample throughput of up to 15 l/h and more
AutoLOCK grinding chamber for particularly safe work
Final fineness down to d50 < 40 μm, sieve rings 0.08 – 6 mm
Particularly good cooling of the grinding material
Pleasantly quiet operation
Very easy to clean due to Clean Design
PULVERISETTE 14 premium line can be turned into a Cutting Mill with just a few simple motions for fast, efficient pre-grinding of fibrous materials and plastics – in an optimised mode with up to 10,000 rpm. It is genuinely multifunctional with the choice of grinding with an impact or cutting rotor!
Fritsch experts will be on hard to demonstrate PULVERISETTE 14 premium line and more at ANALYTICA 2018 • Hall A1 • Booth 525.