The Alert 2003 for fluoride is available in single or dual stream versions and the range can be adjusted by changing the standard solution used for automatic calibration
The latest addition to the Alert range from Applikon Analytical is the new fluoride analyser.
Designed for reliability and minimal operator attendance the Alert analyzer is perfect for drinking and waste water applications.
The analyzer utilises the unique dynamic standard addition (DSA) methodology to remove interferences and validate each and every result as correct.
The analysis is capable of determining fluoride down to 0.3mg/l with a maximum calibrated range of 10mg/l.
The Alert 2003 for fluoride is available in single or dual stream versions and the range can be adjusted by changing the standard solution used for automatic calibration.
Calibration can be programmed for a user-defined frequency along with additional cleaning programmes where required.
The running costs are kept to a minimum by low reagent use, typically less than 2ml of buffer and 1ml of fluoride standard per analysis, and minimal consumables.
Attendance for planned maintenance is usually carried out on an annual basis.
