The ADI 2018 process ion analyser will provide analysis for potassium at approximately 10 minute intervals and report data in the required format for compliance reporting and process control.
Potassium is present in natural waters, particularly brackish water and water courses within agricultural catchments, but has a prescribed limit of 10mg/l in drinking water supply within the European Community.
Monitoring the potassium concentration in the raw water feed and final drinking water will allow full control and compliance for drinking water supply.
The ADI 2018 process ion analyser from Applikon Analytical BV bridges the gap between the process and the laboratory by providing automated potassium analysis on both the raw water feed and finished product.
Using the Dynamic Standard Addition method the analyser will provide analysis without interference from matrix effects and validate each and every result as correct.
