Leica Microsystems has launched a water immersion micro dispenser that is easy to retrofit and enables the automatic supply of water immersion during experiments.
Live cell research and screening applications are mainly based on samples in an aqueous solution, so the use of water objectives is becoming more important.
Water objectives allow aberration-free focusing into such samples.
Unfortunately, water evaporates at room temperature, even more so at 37C and therefore cannot be used for long-term experiments.
Leica Microsystems's water immersion micro dispenser can be used with water immersion objectives even for long-term experiments of living organisms and screening experiments in live cell research.
From a small water reservoir magnetically attached to the centre of the objective nosepiece, water is automatically pumped into a water cap mounted on the objective.
The compact design allows the utilisation of all nosepiece positions.
The correction ring stays accessible and the full free working distance of the water objective is maintained.
Due to the design of the water cap, the water droplet remains in place, even for screening or mark-and-find experiments that involve a great deal of stage movement.
As the dispenser plus water reservoir is fully integrated in the microscope and climate chamber, the water is already at the right temperature and does not have to be heated.
A protective collar around the objective that can absorb the entire contents of the water reservoir prevents any water getting into the microscope.
The water immersion micro dispenser is designed for the Leica DMI6000 B inverted microscope, which is a component of confocal as well as high-end widefield systems.
