Cable and connectors for applications that require high reliability, small diameter, low noise, chemical resistance or maximum flex life
In2Connect now represents Calmont Wire and Cable of the USA. Calmont is an ISO 9001 registered manufacturer providing technical solutions for critical applications - from simple hook-up wire to complex, multiway, wires and cables to customer, UL or military specifications.
Working with PVC, polyethylenes, silicones, ME fluorocarbons, polyurethane, TPE, etc, Calmont's performance is said by In2Connect to be unrivalled for applications that require high reliability, small diameter, low noise, chemical resistance or maximum flex life.
These include medical - reusable and disposable cables including optics, lumens, drain tubes for catheters, diagnostic imaging, endoscopy, laparoscopy, medical robotics, etc, military - spacecraft to satellites, aircraft, missiles, tactical comms + shipboard and subsea.
High flex industrial and robotics - robotic machine control, sensors, test and measurement, low noise EMI resistant, HV test probes.
High temperature - silver or nickel plated conductors, with Tefzel, Teflon PFA and FEP, silicone rubber and other specialist polymers Calmont's rapid prototyping service takes a concept, whether simple or complex, and turns it into a prototype and delivered within two to three weeks.
Prototypes are not just limited to a traditional wire or cable.
If the design of your product lends itself to the same standard manufacturing processes, such as extrusion, cabling or braiding, the opportunities are limitless.
Typical length produced under this programme is 60 to 200m.
