Automation now plays a vital and cost effective way of carrying out many titration tasks
With the ever increasing work load that chemists face, and in many cases a reduction in personnel, you can't afford to ignore the power and help that automation can bring to your business.
When should a sample changer system be used? For large numbers of samples.
When a high level of automation is required. Where sample preparation must be rationalised.
Where there is no time for sample preparation.
Where the sample must be dissolved immediately before the titration Where the highest precision and reproducibility is demanded.
Lower cost analysis.
Greater sensitivity in the detection of end-points through mathematical evaluation.
Error-free documentation of analysis results on-line to Lims systems.
The benefits of automating your titration system: High sample throughput.
Reproducible results.
Operator requires no special knowledge.
Operational personnel are freed for the duration of the analysis.
Contact with toxic chemical is reduced to a minimum.
The system can operate seven days a week for twenty-four hours.
For mundane tasks Metrohm recommends the flexible USB 814 sample processor in conjunction with iits Titrando range of titrators.
This system boasts many features including: Rinsing and aspirating of sample.
Calibration and regeneration of electrodes.
Many standard and specially manufactured sample racks available.
For more capacity the USB robotic 815 XL sample processor (again in harmony with the Titrando range) offers this.
A twin head option is available. This is particularly useful when aqueous and non-aqueous titrations are to be performed, or conductivity and pH measurements taken on the same sample.
A maximum of 999 positions are available
