Fluid Metering has introduced the V300 stroke rate controller for all FMI V-Series variable speed metering pumps.
Fluid Metering has introduced the V300 stroke rate controller for all FMI V-Series variable speed metering pumps.
The V300 is designed for accurate fluid metering in the laboratory, test stands, pilot plants, and process and production applications.
The front panel membrane switches offer convenient manual setting of pump stroke rates, which are adjustable in 0.1% increments.
Stroke rate also can be controlled electronically through an interface which can accept 4-20mA, 0-5V dc, and 0-10V dc input signals typically provided by process sensors and instrumentation.
A LCD readout displays either the percentage of flow rate in the manual position or the actual percentage of selected input signal when controlled electronically.
The V-300 is capable of variable control of fluid flow in both forward and reverse directions.
In addition, membrane switches can start and stop the pump without the user needing to readjust the stroke rate settings.
The V300 operates on 100-240V 50/60 Hz and is CSA, CSA-US, and CE rated.
It is compatible with the RHV, QV, QVG and Q2V Ratio:Matic pump models providing flow ranges from 0 to 4 L/min (60 gal/hr) at pressures up to 100 psig (6.9 bar).
When used with the Q2V Ratio:Matic dual pump drive, exceptional proportional metering of two fluids, up to 500:1 ratio, can be accomplished, says the company.
The V300 electronics are housed in a rugged anodised enclosure, making the unit ideal for both bench-top and wall mounting in laboratory, process and production environments.
