The three models in the GPC series can be integrated into everyday lab processes flexibly and comfortably, helping the user achieve precise and reliable pipetting on a daily basis
Speed and precision hand in hand - that's what the new GPC series of pipette calibration balances from Sartorius offers.
The balances in the GPC series are ideally suited for gravimetrically testing the volume of any pipette size.
With 6ml and 21ml sampling chambers, the GPC series can calibrate pipettes with a volume of up to 1000ul, depending on the model.
If you need to calibrate larger volumes, you can use the GPC65-CW or GPC225-CW.
Sartorius also offers an optional 50ml sampling chamber with a special pipette draft shield.
Several fine details of design make this calibration balance stand out not only for its precision, but also for its ease of use.
For example, these models do not require a standard draft shield.
This saves users significant time, as they do not need to open and close the draft shield.
Another example is the evaporation trap, fitted as standard, which maintains the humidity at 60% - 90%, thus preventing loss of liquid from the sampling chamber.
In addition, the modularly designed system allows users to adjust their pipette calibration workstation so that they can work ergonomically.
The liquid taken up in the pipette is weighed on a balance.
The balance transmits the weight value to a PC, where the calculations are performed, for example, by Sartorius's Picaso software.
The volume of the liquid is calculated from its weight and density and compared with the nominal volume for the pipette.
After taking a series of measurements, the calibration results are printed as a GLP-compliant report.
With the optional carrying case, you can pack up your GPC pipette calibration balance along with its most important accessories.
Now you can calibrate your pipettes wherever you are.
If you are looking for quick, mobile and ergonomic pipette calibration equipment, then the GPC series is right for you.