Escaping toxic gases, accidental chemical spills and other laboratory liquid handling hazards are preventable with specially engineered bottle caps from Bio-Chem Valve and Omnifit.
Escaping toxic gases, accidental chemical spills and other laboratory liquid handling hazards are preventable with specially engineered bottle caps from Bio-Chem Valve and Omnifit.
Designed to ensure safe, controlled fluid and gas flow, these caps - designed in a variety of configurations - help control dangerous, costly, laboratory mishaps which can compromise the safety of staff, cost time and money for an emergency cleanup, and result in down time and product loss.
To prevent vapours from escaping and contaminating the work environment, while still maintaining a steady flow, the simple and versatile 'T' Series cap can be used.
With an optional integrated check valve and filter, it prevents the introduction of unwanted, harmful ambient debris.
At the same time, the combined air inlet and check valve configuration enables air to flow into the bottle to replace the removed liquid while preventing particulate contamination.
Measurement mistakes while transferring specific liquids can be prevented with the 'Q' Series or 'C' Series bottle caps.
These caps, fitted with optional on/off valves, allow for fool-proof, precision operation of individual fluid lines to carefully control a chemical reaction.
Since these safety valves can be shut with precision, the caps are useful for transporting and handling fluids to and from individual stations within the laboratory.
All three safety bottle models from Bio-Chem Valve and Omnifit feature an anti-twist cap that allows the bottle to spin freely within the cap to prevent tubes from twisting, so there is no need to disconnect fluid lines before unscrewing the cap.
