Whether used as a stand-alone instrument or with a Titrando, the 856 Conductivity Module is the latest add-on to Metrohm autotitration systems.
Conductivity can now be measured using the Metrohm Titrando autotitrator as the 856 can be integrated into a Titrando system.
With the 856, there is a galvanically separated measuring input so conductivity and pH measurement using a Titrando can now be measured in the same sample beaker.
There are three new conductivity cells to measure from 0.01mS - 2,000mS/cm, which have five-ring technology that allows a wider range of linearity than classical conductivity cells with Pt sheets and shows no wall effect.
The 856 Conductivity Module is an extension measuring input for any Titrando installation.
Four MSB inputs are available for connection to a stirrer (801, 804 or 803) or dosing units.
Two USB interfaces can connect up to a printer, bar code reader and so on.
There is no interference to potentiometric measurements.
Modes include CAL C, MEAS Cond, Dosing (Add, Prep, Empty) and the instrument is a fully FDA compliant stand-alone conductivity meter when using 840 Touch Control.
