Diamond Light Source (DLS) has taken delivery of seven Carbolite electric furnaces designed to provide researchers with high-quality thermal equipment for sample preparation and processing.
Diamond is a third-generation light source with an electron beam energy of three Giga electron volts.
At its heart is a circular vacuum chamber, measuring half a kilometre in circumference, through which electrons travel at just less than the speed of light.
Passing the electrons through specially designed magnet arrays produces infrared, ultraviolet and x-ray beams, which enable researchers to study the basic structure of many materials down to the scale of molecules and atoms.
Within the doughnut-shaped building are 14 experimental stations, known as beamlines, with eight more due for completion by 2012.
The beamlines are supported by laboratories that provide researchers with in-house facilities for performing experiments in a range of fields, including health research, engineering, environmental science, sustainable energy, cultural heritage and fundamental physics.
Plans for a further 10 beamlines are currently under review.
Carbolite furnaces had previously been supplied for sample preparation and related activities at the Synchrotron Radiation Source (SRS) at Daresbury, Cheshire.
The equipment supplied by the company to DLS includes a specially designed high-vacuum tube furnace, four conventional tube furnaces and two chamber furnaces.
Maximum operating temperatures are between +1,200C and +1,500C.
These furnaces are mainly utilised for heat treatments that are commonly used for inducing structural and phase changes, which is essential for material, engineering and environmental science.
The tube furnaces allow additional species to be introduced or intercalated into the structure of materials, which can then be examined using x-ray diffraction.
The vacuum tube furnace has silicon-carbide heating elements that provide a maximum operating temperature of +1,500C, with control provided by a Carbolite 301 PID instrument that allows temperature ramp rates and dwell periods to be preset for different procedures.
Samples are held in a 50mm-diameter, 450mm-long work tube.
Reliable vacuum performance on the model at DLS is achieved by means of a rotary-vane roughing pump combined with a high-vacuum oil diffusion pump.
Models with a turbo-molecular high-vacuum pump and fully oil-free roughing pump are also available from Carbolite.
The four standard Carbolite tube furnaces provide heating capabilities up to +1,500C in air or inert gases and include two models with three-zone control that allows temperature gradients to be applied or the very accurate control of long heated lengths to be achieved.
The two chamber furnaces have operating temperatures up to +1,300C and +1,500C, the higher-temperature model having a rapid-heating capability.
