LTE Scientific’s Touchclave-Lab autoclave range has been designed to tackle data acquisition in the lab.
A standard feature on all Touchclave-Lab models is its internal memory. Up to 5000 cycles are stored on an internal flashcard, which, when full is simply replaced.
The flashcard data is easily downloaded to a PC using LTE’s Touchclave-NET software. All data is checksum protected, and thus tamper-proof.
Alternatively, data can be downloaded in real-time to a remote PC. This is achieved either through a hard-wired installation for PC’s which are close to the autoclave, or via Ethernet for data tends to be collected centrally.
Touchclave-Lab autoclaves are available in a range of capacities from 150 to 450-litres and can be supplied with internal heaters, steam generators, or fed from customers own steam supply as required.
The range incorporates a state-of-the-art touch-screen control system for entering and displaying all commands, cycle and program data. ‘K’ models include a water jacket cooling system to enhance cycle performance and can also be fitted with steam jackets allowing effective drying of porous and other loads.
All LTE products are supplied with Sterling anti-bacterial powder coating.
A choice of eight user-programmable cycles can be stored in the memory, with an optional memory expansion facility boosting the total to 20. All Touchclave-Lab autoclaves can be supplied with a number of additional features including vacuum, air ballast, effluent retention and range of printers/recorders.
