Resistive-based humidity and temperature sensors use advanced ceramic technology to enable them sensors to recover fully from condensation
The ACI series relative humidity transmitter utilises a resistive-based humidity and temperature sensor.
Advanced ceramic technology enables these sensors to recover fully from condensation.
The ACI/RH1 series is ideal for the HVAC industry applications involving clean rooms, operating rooms, and any other application requiring precise humidity measurement.
The transmitter design accurately calculates the sensors logarithmic response with a microprocessor-based system.
The output is jumper selectable to achieve 4-20mA, 0-5V, 0-10V.
Features accuracy ratings specified within a 20% range (example 40%-60%).
Each ACI/RH1 humidity transmitter is calibrated at three different points over the 20% range, using a Nist traceable humidity chamber.
The operating range is (0 to 100% RH) and (-10 to 160F). The supply voltage is (15 to 36VDC) and 24VAC.
The output is field selectable to 4-20mA, 0-5VDC, and 0-10VDC.
The units can be ordered for outside, duct, and room configurations.
Wipedown and field calibration applications in the near future.
