Titrate easily and quickly with this manual titrator in combination with a magnetic stirrer and an exchange unit
In many sectors titration is used as a quick and favourably-priced determination method.
However, having to handle reagents and unfamiliar burette manipulation deters many potential users.
Metrohm offers you the solution: titrate easily and quickly with the manual titrator in combination with a magnetic stirrer and an exchange unit.
Version 2.775.0110 of the manual titrator includes the Metrohm 775 Dosimat and one 20ml exchange unit.
Version 2.775.0130 comes with the 775 Dosimat, one 20ml exchange unit plus a magnetic stirrer.
The manual titrator offers all you need to get the job done.
Operating mode: Dos titration.
Backlit liquid crystal display.
Including push-button cable for manual addition control and one 20ml exchange unit.
The manual titrator can be ordered with a magnetic stirrer as an option.
Exchange units are available with 1, 5, 10, 20 and 50ml burette volumes.
Dispensing accuracy and reproducibility better than required by DIN 12650.
Titration is simple and straightforward.
The reagent is added by pressing a push-button. Ttitrants can be added in very small volume increments to avoid over-titrating samples.
Titrant consumption is shown on the titrator display; reading and meniscus errors common with glass burettes are ruled out.
Resolution of the display is 1µl - ten times better than the reading accuracy of a glass burette. Metrohm exchange units can be fitted with reagent bottles from most suppliers.
Transfer and manipulation of the reagents is reduced to a minimum.
