Sewage slime regulations state that, before chemical analysis, soil samples must be disagglomerated after drying into a granular size of below 2mm
In recent times, the analysis of soil samples for the optimisation of agricultural production and the identification of harmful substances has become increasingly important.
The law governing the removal of waste states that, for soils producing sewage slime, chemical samples must be taken to calculate the parts encouraging growth and to establish the possible presence of heavy metals or radioactive deposits.
In addition, DIN regulations (eg, DIN 19 683) exist, according to which norms can be established for physical laboratory investigations for the identification of granular size structure of soil samples.
The so-called sewage slime regulations state that, before chemical analysis, soil samples must be disagglomerated after drying into a granular size of below 2mm.
Any hard elements such as stone may therefore not be crushed, but must be separated out.
Impact crushing has proved very successful for reducing agglomerates.
Equally successful is crushing by friction, where the frictional parts used are relatively soft and flexible.
The Pulverisette 8 combines both sorts of crushing: in a cylindrical grinding chamber, circulating spiral plastic brushes throw the samples against the side of the grinding chamber, the impact achieved thus crushing the agglomerate.
At the same time, the bristles sweep the particles along a 2mm perforated plate, the resulting friction produces further size reduction while the sieve effect of the perforated plate separates the particles by size.
The crushed particles are collected in a container underneath the mill.
At the end of the grinding line, the uncrushed stones are separated out.
The Pulverisette 8 soil deagglomerator will be particularly useful in institutes for soil research and in agricultural research and investigation organisations.
Its fast working procedure makes it particularly advantageous where a large number of samples is involved.
Sample preparation - ie, size reduction of the agglomerate and separation of stones - is performed in less than one minute.
There is no need for cleaning after the completion of each sample preparation, since the Pulverisette 8 cleans itself during operation with its own brushes.
