The Copley Scientific BRS 3000 breath simulator for metered dose inhaler (MDI) and dry powder inhaler (DPI) testing is expected to be unveiled at Respiratory Drug Delivery 2012 in Arizona.
As a companion to the BRS 2000 unit for nebulisers, which was previewed at ISAM 2011, the BRS 3000 allows users to precisely define and apply breathing profiles that mimic those of the patient during inhaler use.
This enables the exploration of DPI and MDI performance under test conditions that more accurately reflect in-use situations.
Both the BRS 2000 and BRS 3000 breath simulators can be used as part of a system to make in vitro dose uniformity and aerodynamic particle size distribution data (measured by cascade impaction) more representative of in vivo behaviour.
Each breath simulator allows the application of various different waveforms including user-defined flow rate versus time profiles. Standard sinusoidal, rectangular and triangular waveforms can also be generated with control over inhalation/exhalation ratio, breath volume, breathing duration and breaths per minute.
With a maximum inhalation volume of 1 litre, the BRS 2000 is specified for testing nebulizers under neonate, infant, child and adult tidal breathing conditions.
The BRS 3000, in contrast, has an inhalation volume of up to 5 litres, a higher maximum flow rate and a higher maximum flow rate acceleration to meet the demands of MDI and DPI testing, when powerful inhalation-only manoeuvres are required.