Suitable for smaller laboratories, this system is recommended for applications such as the preparation of HPLC isocratic and gradient solutions
The Synergy system from Millipore is designed to produce ultrapure water (18.2M.cm resistivity at 25C) from pre-treated water on demand, at a flow rate of 1.0-1.2ml/min.
Suitable for smaller laboratories, this system is recommended for applications such as the preparation of HPLC isocratic and gradient solutions and solutions for spectroscopic analyses.
Plug-and-use purification packs, tailored to the feedwater source, can be easily replaced in seconds.
For sensitive applications requiring ultra-low levels of organics (TOC levels <5ppb) a built-in dual-wavelength UV lamp (185nm and 254nm) is available.
Final point-of-use purification can be obtained by using either a Millipak 0.22um absolute final filter or a Pyrogard D ultrafilter for removal of pyrogens and nucleases.
Automatic recirculation allows the system to maintain water quality in between periods of use and the built-in resistivity meter verifies water quality.
