These tables allow uniform airflow through the work surface, and eliminate eddies and stagnant air pockets that are on or above the work surface of solid-top tables
Clean Air Products introduces series 64 perforated stainless steel cleanroom tables.
These tables allow uniform airflow through the work surface, and eliminate eddies and stagnant air pockets that are on or above the work surface of solid-top tables.
They feature a stainless steel support frame and are ideal for vertical flow cleanroom applications.
Continuous-top and perimeter-frame models are available.
The Series 64CT continuous-top table tops are made from a single sheet of stainless steel that is perforated, forming a continuous, smooth top.
Holes are available in nominal sizes of 1/4inch on 1/2inch staggered centres, 3/8inch on 1/2inch straight centres, and 3/4inch on 1inch straight centres.
Special table reinforcing is installed, so that none of the holes are blocked, and the underside of the table can be easily cleaned.
The Series 64PF perimeter frame table tops are made with a piece of perforated stainless steel with 1/8inch diameter holes, spot welded to a perimeter stainless steel frame.
The underside is reinforced with 6inch stainless steel egg crate support.
These supports are installed so that none of the 1/8inch diameter holes are completely covered.
Holes are available in 1/8inch diameter on 3/16inch staggered centres.
Clean Air Products has been designing and manufacturing cleanroom systems and related products for more than 20 years.
