The new Hart Scientific 1620A paperless temperature and humidity data logger is equipped with wireless, ethernet, and RS-232 communications
Designed to facilitate the electronic management of environmental temperature and humidity data, the Hart Scientific 1620A thermo-hygrometer is intended for environmental monitoring in critical locations such as calibration and research labs, pharmaceutical and chemical storage areas, and many medical environments.
The Model 1620A - the DewK - accepts inputs from up to two sensors, which may be mounted directly on the unit or remotely (up to 30 metres away).
The DewK allows sensor hot-swapping and each sensor contains its own calibration data to prevent down time during calibration service.
The 1620A comes with a NVLAP-accredited calibration.
Two sensor models are available.
The H model reads temperature to +/-0.125C over its calibrated range of 16-24C.
It measures humidity to +/-1.5%RH from 20% to 70%RH.
The S model reads temperature to +/-0.25C over its calibrated range of 15-35C.
It records humidity to +/-2%RH from 20-70%RH.
In addition to on-board memory which stores up to 400,000 date and time-stamped measurements, data collected by the Hart Scientific 1620 may also be sent directly to a PC in real time using the serial port, ethernet, or optionally using 802.15.4 wireless communication.
By adding Hart Scientific's LogWare III software, you can simultaneously monitor an unlimited number of instruments.
The Windows-based software enables statistical and graphical analysis of real-time or previously recorded data, and can send emails to PDAs, pagers, and cell phones when triggered by user-defined events.
